China Hex Rod Coupling Manufacturers Factory Suppliers
-
Hex Rod CouplingOutside Diameter: 10–48 mmread more
Height: 10–80 mm
Thread Specification (Both Ends): Same or different (Custom-made)
Width Across Flats: 12–50 mm (Custom-made)
Thread Depth per... -
Hydraulic NutProduct Name: Hydraulic Nutread more
Nominal Diameter: M20×1.5 to M100×3
Material: 45# Steel / 40Cr
Locking Torque: 50-1200 N·m -
Industrial Socket SetProduct Name: Industrial Socket Setread more
Drive Size: 1/2 inch, 3/4 inch, 1 inch
Socket Size: Metric / Imperial (Customizable Combination)
Material: Chrome-Molybdenum Steel (Cr-Mo) -
Socket Wrench Set MetricProduct Name: Socket Wrench Set Metricread more
Drive Size: 1/4 inch, 3/8 inch, 1/2 inch
Socket Size: Metric (4mm-32mm, Customizable Combination)
Material: Chrome-Vanadium Steel (Cr-V) /... -
Hydraulic Lock NutOutside Diameter: 10–48 mmread more
Height: 10–80 mm
Reusable Torque Degradation: ≤20% (Custom-made)
Thread Tolerance: 6H (Custom-made)
Hardness: HRC 28–38 (Custom-made) -
Metric Square NutsOutside Diameter: 10–48 mmread more
Height: 10–80 mm
Width Across Flats: 8–40 mm (Custom-made)
Thread Specification: M4–M24 (Custom-made)
Hardness: HRB 80–95 (Custom-made) -
Threaded Rod Coupling SleeveOutside Diameter: 10–48 mmread more
Height: 10–80 mm
Internal Thread Specification (Both Ends): M6–M30 (Custom-made)
Concentricity: ≤0.1 mm (Custom-made)
Wall Thickness: 2–6 mm... -
Bolt Threaded SleeveOutside Diameter: 10–48 mmread more
Height: 10–80 mm
Internal Thread Specification: M6–M30 (Custom-made)
External Thread Specification: M10–M48 (Custom-made)
Hardness: HRC 35–45... -
Drive Axle NutOutside Diameter: 10–48 mmread more
Height: 10–80 mm
Thread Specification: M8–M36 (Custom-made)
Locking Torque: 20–500 N·m (Custom-made)
Hardness: HRC 30–40 (Custom-made) -
Hex Connector NutOutside Diameter: 10–48 mmread more
Height: 10–80 mm
Width Across Flats: 10–50 mm (Custom-made)
Internal Thread Specification: Same or reducing on both ends... -
Threaded Rod Coupler ReducerOutside Diameter: 10–48 mmread more
Height: 10–80 mm
Thread Specification (Both Ends): Reducing combination (e.g., M10 to M16) (Custom-made)
Step... -
Hydraulic SleeveOutside Diameter: 10–48 mmread more
Height: 10–80 mm
Inner Hole Diameter: 6–42 mm (Custom-made)
Wall Thickness: 2–8 mm (Custom-made)
Seal Groove Size: Custom-made
WebChoose from our selection of rod alignment couplers, low-strength steel coupling nuts, medium-strength steel coupling nuts, and more. In stock and ready to ship. BROWSE...
WebBetween Stud Panel Mounting Bracket. Cable/Conduit to Stud. Device Leveler and Retainer. Floor Mounted Box Supports. Nail Plates. Old Work Box Mounts. Screw Gun Brackets...
WebShop online Hex Rod Coupling Nuts. Low Price, High Quality, FREE Shipping over $100. Threaded rod coupler nuts are often used to connect Threaded Rod to Hanger Bolts....
WebInch-to-Metric Female Hex Thread Adapters. Adapt threaded rods from inch to metric. These adapters connect two male-threaded fasteners, so you can change the gender of a...
WebInch-to-Metric Female Hex Thread Adapters. Adapt threaded rods from inch to metric. These adapters connect two male-threaded fasteners, so you can change the gender of...
WebHigh-Strength Hex Shaft Coupler. Our hex shaft couplers are manufactured out of high strength C1018 steel and are black oxide coated for corrosion resistance. Hex shaft couplings offer the best...
Send Inquiry
