Fasteners

• Hydraulic Cylinder Nut

  Outside Diameter: 10–48 mm
  Height: 10–80 mm
  Thread Specification: M6–M36 (Custom-made)
  Thread Accuracy: 6H / 6g (Custom-made)
  Hardness: HRC 25–35 (Custom-made)

  read more
• Hydraulic Lock Nut

  Outside Diameter: 10–48 mm
  Height: 10–80 mm
  Reusable Torque Degradation: ≤20% (Custom-made)
  Thread Tolerance: 6H (Custom-made)
  Hardness: HRC 28–38 (Custom-made)
  

  read more
• Metric Flange Nuts

  Outside Diameter: 10–48 mm
  Height: 10–80 mm
  Flange Diameter: 14–60 mm (Custom-made)
  Flange Thickness: 2–6 mm (Custom-made)
  Thread Specification: M4–M30 (Custom-made)

  read more
• Metric Square Nuts

  Outside Diameter: 10–48 mm
  Height: 10–80 mm
  Width Across Flats: 8–40 mm (Custom-made)
  Thread Specification: M4–M24 (Custom-made)
  Hardness: HRB 80–95 (Custom-made)

  read more
• Threaded Rod Coupling Sleeve

  Outside Diameter: 10–48 mm
  Height: 10–80 mm
  Internal Thread Specification (Both Ends): M6–M30 (Custom-made)
  Concentricity: ≤0.1 mm (Custom-made)
  Wall Thickness: 2–6 mm...

  read more
• Bolt Threaded Sleeve

  Outside Diameter: 10–48 mm
  Height: 10–80 mm
  Internal Thread Specification: M6–M30 (Custom-made)
  External Thread Specification: M10–M48 (Custom-made)
  Hardness: HRC 35–45...

  read more
• Drive Axle Nut

  Outside Diameter: 10–48 mm
  Height: 10–80 mm
  Thread Specification: M8–M36 (Custom-made)
  Locking Torque: 20–500 N·m (Custom-made)
  Hardness: HRC 30–40 (Custom-made)

  read more
• Heavy Hex Coupling Nut

  Outside Diameter: 10–48 mm
  Height: 10–80 mm
  Width Across Flats: 14–55 mm (Custom-made)
  Thread Specification: M6–M36 (Custom-made)
  Strength Grade: Grade 8 / Grade 10 / Grade...

  read more
• Hex Connector Nut

  Outside Diameter: 10–48 mm
  Height: 10–80 mm
  Width Across Flats: 10–50 mm (Custom-made)
  Internal Thread Specification: Same or reducing on both ends...

  read more
• Hex Head Cap Nut

  Outside Diameter: 10–48 mm
  Height: 10–80 mm
  Cap Height: 3–12 mm (Custom-made)
  Thread Specification: M6–M30 (Custom-made)
  Closed End Wall Thickness: 1–3 mm (Custom-made)

  read more
• Hex Head Sleeve Nut

  Outside Diameter: 10–48 mm
  Height: 10–80 mm
  Sleeve Inner Hole Diameter: 5–25 mm (Custom-made)
  Width Across Flats: 12–55 mm (Custom-made)
  Wall Thickness Uniformity: ≤0.05 mm...

  read more
• Hex Nut Sleeve

  Outside Diameter: 10–48 mm
  Height: 10–80 mm
  Sleeve End Hex Socket Size: 8–46 mm (Custom-made)
  Insertion Depth: 8–70 mm (Custom-made)
  Wall Thickness: 2–5 mm (Custom-made)

  read more