China Threaded Rod Coupling Sleeve Manufacturers Factory Suppliers
-
Threaded Rod Coupling SleeveOutside Diameter: 10–48 mmread more
Height: 10–80 mm
Internal Thread Specification (Both Ends): M6–M30 (Custom-made)
Concentricity: ≤0.1 mm (Custom-made)
Wall Thickness: 2–6 mm... -
Heavy Hex Coupling NutsProduct Name: Heavy Hex Coupling Nutsread more
Thread Size: M6-M64
Material: Carbon Steel / Alloy Steel
Thread Accuracy: 6H/6G -
Industrial Socket SetProduct Name: Industrial Socket Setread more
Drive Size: 1/2 inch, 3/4 inch, 1 inch
Socket Size: Metric / Imperial (Customizable Combination)
Material: Chrome-Molybdenum Steel (Cr-Mo) -
Hex Socket Bit SetProduct Name: Hex Socket Bit Setread more
Drive Size: 1/4 inch, 3/8 inch, 1/2 inch
Bit Size: Metric 1.5mm-14mm (Customizable Combination)
Material: S2 Alloy Steel -
1/2 Impact Socket SetProduct Name: 1/2 Impact Socket Setread more
Drive Size: 1/2 inch (12.7mm)
Socket Size: Metric 10mm-36mm (Customizable Combination)
Material: Chrome-Molybdenum Steel (Cr-Mo) -
Impact Extension Bar SetProduct Name: Impact Extension Bar Setread more
Drive Size: 1/2 inch, 3/8 inch, 3/4 inch
Bar Length: 75mm, 125mm, 150mm, 250mm (Customizable Combination)
Material: Chrome-Vanadium Steel... -
Deep Well Socket SetProduct Name: Deep Well Socket Setread more
Drive Size: 1/2 inch, 3/8 inch, 3/4 inch
Socket Size: Metric / Imperial (Customizable Combination)
Material: Chrome-Molybdenum Steel (Cr-Mo) -
Hex Connector NutOutside Diameter: 10–48 mmread more
Height: 10–80 mm
Width Across Flats: 10–50 mm (Custom-made)
Internal Thread Specification: Same or reducing on both ends... -
Hex Rod Coupling NutOutside Diameter: 10–48 mmread more
Height: 10–80 mm
Hex Rod Width Across Flats: 10–46 mm (Custom-made)
Thread Specification: M6–M30 (Custom-made)
Rod Length: 5–60 mm (Custom-made) -
Hex Rod CouplingOutside Diameter: 10–48 mmread more
Height: 10–80 mm
Thread Specification (Both Ends): Same or different (Custom-made)
Width Across Flats: 12–50 mm (Custom-made)
Thread Depth per... -
Special Socket for RimsOutside Diameter: 10–48 mmread more
Height: 10–80 mm
Internal Hex / Spline Size: Custom-made
Wall Thickness: 3–8 mm (Custom-made)
Hardness: HRC 40–52 (Custom-made) -
Wheel Bearing Hub SocketOutside Diameter: 10–48 mmread more
Height: 10–80 mm
Internal Hex / Spline Size: Custom-made
Socket Depth: 8–75 mm (Custom-made)
Hardness: HRC 40–55 (Custom-made)
WEBChoose from our selection of 8-32 couplings, including over 900 products in a wide range of styles and sizes. In stock and ready to ship. ... Connect two differently sized male-threaded parts,...
WEBChoose from our selection of 10-24 couplings in a wide range of styles and sizes. In stock and ready to ship. BROWSE CATALOG. ... Connect two differently sized male-threaded parts, such as...
WEBChoose from our selection of rod alignment couplers, low-strength steel coupling nuts, medium-strength steel coupling nuts, and more. In stock and ready to ship. ... Fully Threaded. Partially...
WEBnut threaded extension rod coupling sleeve basic element steel pull ring 270 mm sq. chocks spheroidal graphite cast iron . Innovative Membran‐Stadiondächer in Kiev, Warsaw and Vancouver It...
WEBFeb 20, 2017 · 5/8 in.-11 tpi Zinc Rod Coupling Nuts. Crown Bolt's rod coupling nuts are internally threaded nuts in extended lengths. Used with threaded rod, the coupling nut joins 2-piece of...
WEBIncrease or reduce your shaft's diameter to fit equipment, or replace damaged shaft ends. 8 products. Choose from our selection of threaded rod coupling nuts, including low...
Send Inquiry
