Fastener design is characterized by high levels of standardization, serialization, and interchangeability, and is underpinned by relevant national or industry standards. Although small, fasteners are critical to vehicle assembly precision, operational stability, safety, and service life. Common automotive fasteners include bolts/screws, nuts, self-tapping screws, washers, plastic nuts, and clips. Typical fastening methods involve the use of bolts, screws, or studs with nuts in threaded holes, or self-tapping screws in pre-formed holes.
With the rise of new energy vehicles and the increasing adoption of all-aluminum bodies, the importance of new processes and fasteners-such as Flow Drill Screwing (FDS), Resistance Spot Welding (RSW) for aluminum, Self-Piercing Riveting (SPR), and blind riveting-continues to grow. Anti-corrosion coating technologies for fasteners are transitioning from traditional electroplating and phosphating methods to various new, eco-friendly, and high-performance coatings such as Dacromet, Geomet, and Delta. Fastener products must strictly comply with requirements regarding restricted and prohibited substances in automotive parts and materials.
Fastened joints must meet key performance requirements, specifically reliability and safety. Products with a strength class of 10.9 or higher require treatment to prevent hydrogen embrittlement. Thread dimensions for various tolerance classes of metric threads must comply with GB/T 15756, while hole design should reference GB/T 152 and GB/T 5277. Specifications for the ends of externally threaded parts, as well as thread run-outs, shoulder distances, thread undercuts, and chamfers, should reference GB/T 2. Dimensions for through-holes and counterbored holes should reference GB/T 5227, GB/T 152.4, and GB/T 152.3.
Common locking methods primarily fall into three categories: bolt-and-locking-washer assemblies, locking nuts (all-metal locking nuts and non-metallic insert locking nuts), and thread-locking adhesives. The coefficient of friction serves as a fundamental parameter and boundary condition for bolted joint design; common ranges include 0.09–0.15, 0.10–0.16, and 0.12–0.18. Widely used assembly methods include torque control and torque-angle control. Recommended values for bolt/screw engagement depth, thread tapping depth, and drilling depth can be found in the VDI 2230 standard.
